Dimmer Switch with Green Indicator for LED Light/CFL/Incandescent, 003, 1 PC
If in stock, Ships within 1-2 business days.
Delivery will take around 3-5 business days.
30-day risk-free trial. Learn more
You may also like
Dimmer Switch with Green Indicator for LED Light/CFL/Incandescent, 003, 1 PC
Product detail
Information
⦿ 3-Way Single Pole Compatible Slide control dimmer.Green indicator turns off when the load is on, turns on when the load if off.
⦿ 600W max Incandescent; 150W max dimmable LED/CFL,120VAC, 60Hz*Fully compatible with Cloudy Bay LED light fixtures,600W max Incandescent,150W max Dimmable LED/CFL,120VAC,60Hz *Not compatible with smart lighting fixtures.
⦿ Works with LED, Halogen, Incandescent bulbs - Trim Dial below Cover Plate allows Sensitivity Adjustment upon installation to achieve compatibility with LED Lamps.
⦿ Decorative Wall Plate and Mounting Screws Included, easy to install.
⦿ UL Listed,1 Year Warranty. Please contact us if there is any issue with dimming issue.
Product Description
Dimmer Switch with Green Indicator
- Voltage: 120V AC
- Single Pole/3 Way installation.(please refer to brief wiring instruction below).
- Fine tune adjustment dial to eliminte LED/CFL flickering.
- No screws needed to fasten wall plate. Looks perfectly blend into the wall.
- Can be used with literally all kinds of your household lighting.
- Dimmer has been tested to be fully compatible with any light fixtures of Cloudy Bay Lighting family, including Cloudy Bay flush mount ceiling lights.
- NOT COMPATIBLE WITH SMART LIGHTS, SUCH AS GE C, PHILIPS HUE WHICH IS CONTROL BY WIFI, BLUE TEETH, ZIGBEE etc.
Compatible with CFL/LED/Incandescent
Cloudy Bay dimmer improves the compatibility of dimmable CFLs and LEDs compared to standard dimmers by eliminating flicker, making sure lights operate properly at all levels.
Tip: Most dimmable LEDs and CFLs will not acheive as low level as incandescent or halogen sources.
Fine tune with adjustment dial
At the low end of the dimming level when the light starts to flicker, fine tune the dimming performance by turning the adjustment dial counter-clockwise so that the light output is stable. Set your slider to where there's no hum or flickering on light fixtures.
SINGLE POLE/3-WAY CIRCUIT INSTALLATION
- Single Pole: Connect the green dimmer ground wire to ground wire in the wall-box, Connect the black dimmer wire to the hot input wire removed from the switch,Connect either of the 2 red dimmer wires to the light fixture wire removed from the switch,Use wire nut to cap the remaining red wire on dimmer
- 3-Way: Connect the green dimmer ground wire to the ground wire in the wall-box, Connect the black dimmer wire to the TAG wire removed from the switch, Connect the red dimmer wires to the remaining wires removed from the switch
Trouble shooting
1: Light flash in the whole dimming range
a. Check the lighting/lamp is dimmable or not
b. The lighting fixture is not compatible with our dimmer
c. Most dimmable LEDs and CFLs will not acheive as low level as incandescent or halogen sources.
d. Control a group of lighting fixtures/lamps with one dimmer may cause flicker due to variation of dimming circuit and dimming range. Please use dimmer to
control lights/lamps in the same type or same model.
2. Light flash in low dimming range
a. Slightly turn the adjustment dial counter- clockwise to achieve full compatibility with the lights.
3. Get dimmer list from light bulb/lighting fixture's supplier to avoid compatible issue with our dimmer, a broad dimmer list means less dimming issue, such as flicker,buzz, or flash issue, also, better buy FCC compliance lighting product for stable performance
Features